ok here we go i putting my 93 prelude show car back together but my %$&^@$ driving lights dont come on??? my turnsignals and headlights work brake lights work interior lights work... but my drive lights and my instrument cluster dont come on??? any idea's i replaced fuse but it keeps blowin out soon as you turn the lights on????? any idea's???  

Judging from your other posts it sounds like you know what your doing, but we can start with the obvious things first. Check for shorts and bare wires everywhere, especially where wires run through sheet metal. Are you using a different spec bulb than what the factory used? I put some higher watt bulbs in some factory driving lights once, and it was popping fuses left and right.

I have also had problems with the socket that holds the bulb before. The little spring tab that acts as the contact for the bulb looses tension and starts to rub on the bulb contact and it creates an arcand pops the fuse.

If it is none of those things, you may need ot see a pro, there is no shame in that. I hate doing electrical crap. I will do anything mechanical on my own cars, but when it comes to chasing electrons around, thats for someone else.  

the wires are ok i took all the factory loom off re wraped the wires with fresh electrical tape and some brand new red looms.. i still have the factory bulbs in ... but i will check the spring if thats not it ill go to the dealer and have them take a look  

I had a problem like this in my 88 chev truck I was putiing a deck in and I lost all power to my cluster lights not the signal indicators oe nhigh berams or the actual gauges... I also lost all power to the deck... I have replacerd the fuse and its still facked.. once you find out what was wrong tel me what it was so I can jam to my beats while chopping wood... lol
peace hope it works out  

ok will do sav!