|
|
Item Posts
Sort Order
|
|
|
f22 auto to h22 standard
|
90exr
New User
| Posts: 3
| Joined: 01/07
Posted: 01/03/07
11:02 AM
|
|
Yeah im a newbie here and getting a 90 ex-r accord this summer.. im planning to do a motor swap and eventually throw in a turbo ..I know this sounds dumb but is it possible to swap a f22 with an auto tranny for a h22 with a standard??? thanks
|
|
|
|
luderunner
Enthusiast
| Posts: 532
| Joined: 08/06
Posted: 01/03/07
11:29 AM
|
|
absolutly possible to put an h22 in there as for converting from auto to standard.. you will need to find a cluctch peddal setup and of course you will need the h22 manuel ecu and engine harness.. my only suggestion here is if you really want to do a turbo i would suggest the h23 it is more boost friendly..its non vtech but the compression ratio is lower wich benefit turbo setups.. good luck what ever you do
|
|
|
|
90exr
New User
| Posts: 3
| Joined: 01/07
Posted: 01/03/07
11:35 AM
|
|
thanks man
|
|
|
|
|
|
90exr
New User
| Posts: 3
| Joined: 01/07
Posted: 01/03/07
12:31 PM
|
|
*** h23's are VERY hard to find ..and if i do its for newer preludes :/ any suggestions?
|
|
|
|
luderunner
Enthusiast
| Posts: 532
| Joined: 08/06
Posted: 01/03/07
05:12 PM
|
|
you can still use the h22vtec with turbo i was only stating for your sake that the h23 is better for turbo beig it has a tad lower compression ratio than the h22 just remember that when you boost do not exceed more than .. id only go 6psi to be safe but people have pushed 8 and 9 psi
|
|
|
|
|
|
|