incase some of you out there dont know that stands for right hand drive.. or to be blunt it is now jdm... this is an update on my project.. ive decided to do it myself.. it isnt as difficult as you would think ... maybe ill post a how to on this subject as well when im all done... anyway after stripping down my donor clip from japan.. i found the fire walls are only held in by a series af tac welds every 5-6 inches apart.. covered and sealed by caulking.. imagine that.. so all i have to do was strip all the caulking away and use a drill bit to knock out the spot welds.. be very careful as not to bend the fire wall if you do your screwed.. lift it out its roughly 40 lbs when you have all components stripped from it... put it in your us carlined up re spot weld it re caulk it.. re spray it and start hookin up all your components again...  

I would like to see a how to on this subject it would be awesome  

soon as i get it all straight and runnin good ill surely do a full write up and ill try to include some pics too if i can figure out how to post pics in this forum