|
|
Item Posts
Sort Order
|
|
|
H22 SWAP
|
k20teg
New User
| Posts: 45
| Joined: 02/07
Posted: 02/25/07
05:38 PM
|
|
WOULD A H22 FIT PERFECTLY IN A 95 PRELUDE OR WOULD I HAVE TO BUY MOTOR MOUNTS?...AND IS THERE ANYTHING ELSE I WOULD HAVE TO GET
|
|
|
|
hondasav
Enthusiast
| Posts: 439
| Joined: 09/06
Posted: 02/26/07
01:43 PM
|
|
nope it will drop right in.. you will have to connect 2 wires if I am correct
|
|
|
|
luderunner
Enthusiast
| Posts: 532
| Joined: 08/06
Posted: 02/26/07
05:16 PM
|
|
whut motor is currently in your lude?? if you have the h23 si version then most latmodel ludes... last few months of 93 -96 all have the same wire harness they will already have the connectors for vtec you just gotta plug em in.. but if you have a lude with an fseries you may have to add the vtec wiring.. but mount wise yes direct swap..
|
|
|
|
|
|
k20teg
New User
| Posts: 45
| Joined: 02/07
Posted: 03/08/07
07:53 PM
|
|
it has a f-series..so i gotta get the vtec wiring..and can i still use the same transmission or do i have to get a h22?..(im asking for my bro)
|
|
|
|
luderunner
Enthusiast
| Posts: 532
| Joined: 08/06
Posted: 03/14/07
01:06 AM
|
|
transmission will work but you should grab up an h22 trans for best results.. if the f series was vtec you may be able to do a direct plug and play swap.. if it wasnt vtec then yes you will hve to either wire the vtec or check the harness for unused plugs as they may have the vtec wires also..
|
|
|
|
|
Posted: 05/29/08
07:29 AM
|
|
hey im new to imports i was with muscle cars but gas is to high but i was wondering what i need to make a 95 prelude with an h23a1 motor into a h22a vtec what all would i need?
cause i broke my crankshaft and i need a new motor and im wanting a h22a vtech!!!
|
|
|
|
|
Posted: 06/10/08
09:54 PM
|
|
the only thing you will need to do is swap the harness into an ODBI to ODBII harness conversion, and look on your head for a stamped code of p13 or p14. whichever code you have stamped on your head is the ecu that you will need to buy, otherwise your v-tec will not work properly, if at all.
|
|
|
|
luderunner
Enthusiast
| Posts: 532
| Joined: 08/06
Posted: 08/25/08
01:13 PM
|
|
you broke a crank then just go grab up a full h22 swap from like tigerjapan or somethin they will have all you need goin from h23 to h22 is easy as hell
|
|
|
|
|
Posted: 05/19/09
08:45 PM
|
|
You dont always have to get an OBDII adapter. there are OBDI H22A's out there.
|
|
|
|
|
|
|