|
|
Item Posts
Sort Order
|
|
|
have some questions on clutchs and injectors
|
|
Posted: 12/11/07
09:01 PM
|
|
have a b20 block with a gsr head going n/a with the build. the block is bored .20 over and have a ballanced and mico polished crank, Crower rods and running 12:1 je pistons the head is ported and polised with type-r cams and fuel rail have a hondata s300 ecu. this is my first big build and need to know what size injectors and also what clutch to use. Had a ACT puck 3 and it went out quick. going to have the motor dynoed and whant to make sure that my injectors will be sufficent. I only said what i had into the build becuse i don't know if what i'm using makes any diffrance. thanks and go getsome. 
|
|
|
|
blackowl6
New User
| Posts: 2
| Joined: 12/07
Posted: 12/15/07
02:08 AM
|
|
Go to a stage 2 clutch(stage three is not the most subtle beast)-If you have the money injectors are great but you should have a management system that is tooled to deal with your performance requirements.A larger throttle body set-up would probably get you more horsies hence the larger injectors...Holley makes some great performance products...check em out good luck........
|
|
|
|
|
|
|
|
|