|
|
Item Posts
Sort Order
|
|
|
vtec pressure switch
|
|
Posted: 11/26/08
09:39 PM
|
|
i have a 95 h22a in my 93 cx hatch. The check engine light is on with code 22, the vtec pressure switch i changed it and the problem is still there what could it be? im about to burn my car to the ground please help.
|
|
|
|
dr_vtec21
New User
| Posts: 16
| Joined: 11/08
Posted: 12/03/08
06:17 PM
|
|
check u have good oil supplie up to the head
|
|
|
|
|
Posted: 12/03/08
10:39 PM
|
|
thanks for the reply man but i found the problem. I made my wireing harness so not all the wire colors are right and i didnt have the harness routed right so the temp sensor was trying to run the switch stupid on my part.
|
|
|
|
|
|
|
Posted: 12/14/08
01:10 PM
|
|
i have the same problem??? its just diff i dont know i have a 92 cx hatch an i need info about where to run the wires oil switch i know one goes to d6 on the ecu but when i ground the other wire wire the car shuts off 
|
|
|
|
vastman
New User
| Posts: 2
| Joined: 03/09
Posted: 03/27/09
10:53 PM
|
|
Checked the Vtech Solenoid. Good. Cleaned the passages and switch. Disconnected the battery for 5 minutes and reconnected. Still no vtech kicking in. No codes, no lights. What is the problem?
|
|
|
|
|
|
|