|
|
Item Posts
Sort Order
|
|
|
NEED HELP WITH MY FUEL CELL!!!
|
|
Posted: 06/05/09
01:58 PM
|
|
i have a 12 gallon fuel cell from Summit, and i am putting it into a 1991 crx si with a built d16z6, and i need to know what all i am going to need to install it properly? an internal or external fuel pump? NEED HELP! 
SOHC aint dead!
|
|
|
|
K20egcw
User
| Posts: 96
| Joined: 06/09
Posted: 06/05/09
02:52 PM
|
|
You can use whatever you'd like. You can put an A1000 or somethin like that on there. Or you can use an Walbro 255 if you want also. Just depends on what you want
|
|
|
|
|
Posted: 06/05/09
05:23 PM
|
|
i would like to do whatever is going to be the most simple, i was thinking a walbro 255 external fuel pump, and what is the best way to go with the fuel lines? because i've already removed the stock ones, and i need some that wont bust or dryrott or anything.
SOHC aint dead!
|
|
|
|
|
|
|
Posted: 06/05/09
05:24 PM
|
|
also will the external fuel pump be easier than the internal? and should i run the lines inside or underneath the car?
SOHC aint dead!
|
|
|
|
K20egcw
User
| Posts: 96
| Joined: 06/09
Posted: 06/05/09
06:12 PM
|
|
Id just use one like how its set up in your stock fuel tank personally. You can run an external pump its not to hard either. As for fuel lines just get some -6AN steel braided lines and some fittings and run em from the fuel cell/pump and then underneath your car to the engine.
|
|
|
|
|
Posted: 06/05/09
08:20 PM
|
|
yo, thanks a lot bro. 
SOHC aint dead!
|
|
|
|
K20egcw
User
| Posts: 96
| Joined: 06/09
Posted: 06/05/09
09:09 PM
|
|
Yup
|
|
|
|
|
|
|