J32A3 swap?

I have been rading on a J32a3 acura type-s swap into a teggy. My question is how difficult would it be, and is it possible to swap into a '92 hatch?  

yes the swap has been done in numerous eg's and a integra or two also. difficulty i havent personally done it but did all the homework required for it and it seems it will be similar to a k swap note i said similar not the same and by no means a simple swap. chasebays has j swap conversion harnesses hasport has mounts but no one i know of makes the axles yet you have to use j axles and switch out the ends i believe with your civic spline ends. also no hood will clear the engine you have to cut your hood and fab a scoop or cowl induction. there really isnt a large aftermarket for j series yet so dont be surprised if your very limited in performance upgrades. but i think it makes like 240 hp and grrrreat torque so even a straight factory motor swap will place you way above the gsr crowd and an edge on k and h swaps.  

check out j32a.com for details on this swap. here is my daily.